Devices

Button - Remove

Remove an obsolete device.

Button - Properties

Modify the properties of an existing device.

Bar Dispenser #1

Type

Enable the type of the bar dispenser.

Port

Enable the serial port of the bar dispenser. This choice is enabled only when the selected type above is serial.

NOTE: The bar dispenser cannot share this serial port with another device.

Section

Enter the section of the bar dispenser.

Bar Dispenser #2

Maitre'D supports 2 Berg bar dispenser devices on the same workstation.

Type

Enable the type of the second bar dispenser.

Port

Enable the serial port of the second bar dispenser. This choice is enabled only when the selected type above is serial.

NOTE: The bar dispenser cannot share this serial port with another device.

Section

Enter the same section as the bar dispenser #1.

NOTE: The North American Protocol does not support separated sections. Maitre'D counts all poured liquids in the section of the first dispenser.

Biometric Reader

Type

Enable the type of the fingerprint biometric device.

Card Reader

Type

Enable the type of the card reader.

Port

Enable the serial port of the card reader. This choice is enabled only when the selected type above is serial.

NOTE: The card reader cannot share this serial port with another device.

Driver

Enable the driver of the card reader.

Cash Card Reader

Type

Enable the type of the cash card reader.

Port

Enable the serial port of the cash card reader. This choice is enabled only when the selected type above is serial.

NOTE: The cash card reader cannot share this serial port with another device.

Driver

Enable the driver of the cash card reader.

Cash Drawer #1 & #2

Type

Enable the type of this cash-drawer.

Port

Enable the serial port of this cash-drawer. This choice is enabled only when the selected type above is serial. This selection will be valid only if a serial printer is defined on the same serial port.

NOTE: A cash drawer cannot share this serial port with another device, except if it is connected to a serial printer.

Driver

Enable the driver of this cash-drawer.

Coin Dispenser

Type

Enable the type of the coin dispenser.

Port

Enable the serial port of the coin dispenser. This choice is enabled only when the selected type above is Serial.

NOTE: The coin dispenser cannot share this serial port with another device.

Driver

Enable the driver of the coin dispenser.

CVM

Type

Enable the type of the CVM monitor.

Port

Enable the serial port of the CVM monitor.

NOTE: The CVM monitor cannot share this serial port with another device.

Driver

Enable the driver of the CVM monitor.

Fiscal Printer

Type

Enable the type of the fiscal printer.

Port

Enable the serial port of the fiscal printer.

NOTE: A fiscal printer cannot share this serial port with another device, except if a cash drawer is connected to it.

Driver

Enable the driver of the fiscal printer.

Digital Video Recorder

IP Address

Enter the IP Address of the DVR.

NOTE: The same DVR can be defined in more then one workstation.

Camera Number

Enter the DVR camera number.

Driver

Enable the driver of the DVR.

Line Display

Type

Enable the type of the line display.

Port

Enable the serial port of the line display. This choice is enabled only when the selected type above is serial.

NOTE: The line display cannot share this serial port with another device.

Port Number

Enter the TCP/IP Port of the DVR.

Driver

Select the driver of the DVR.

Exclude Command Field

Enable this option Not to send the Command field in the text message sent to the DVR.

Exclude Camera Number

Enable this option Not to send the Camera number in the text message sent to the DVR.

Network Printer

IP Address

Enter the IP Address of the network printer.

NOTE: The same network printer can be defined in more than one workstation.

Port Number

Enable the port number of the network printer.

Printer Type

Enable the driver of the network printer.

PIN Pad

Type

Select the type of the PIN pad.

Port

Select the serial port of the PIN pad.

NOTE: The PIN pad cannot share this serial port with another device.

Driver

Select the driver of the PIN pad.

ID

Enter the identification number of the PIN pad.

NOTE: This information is provided by the payment processor or by the gateway provider.

Idle Message

Enter an idle message to be displayed on the PIN pad between transactions.

NOTE: This field is only available when the driver selected above is Verifone. Also, this only works for non-EMV protocols. With EMV protocols, the PIN Pad idle message is controlled by the third-party application driving the PIN Pad.

Identity

Type in the device name as required by the payment processor or gateway provider. This is sometimes referred to as "Secure Device ID".

Prompt for Tip

Enable this option for the pin pad device to quote the customer for a Tip entry.

Print tip line

Enable this option to print a tip and total line on transaction records for card payments.

Printer

Type

Enable the type of the printer.

NOTE: For a USB printer, map it to a COM port, and configure it as a Serial printer.

Port

Enable the port of the printer.

NOTE: A printer cannot share this port with another device, except if a cash drawer is connected to it.

Driver

Enable the driver of the printer.

Scale

Type

Enable the type of the scale.

Port

Enable the serial port of the scale. This choice is enabled only when the selected type above is serial.

NOTE: The scale cannot share this serial port with another device.

Driver

Enable the driver of the scale.

Scanner

Type

Enable the type of the scanner.

Port

Enable the serial port of the scanner. This choice is enabled only when the selected type above is serial.

NOTE: The scanner cannot share this serial port with another device.

Driver

Enable the driver of the scann