The terminal uses a multi-function cable to provide access to the supported connections. Countertop terminals generally require AC power and Ethernet connections. Your configuration may also include a connection to a POS system.
On the back of the terminal at the top, use a #1 Phillips screwdriver to loosen the two screws securing the cover.
NOTE: You do not need to remove the screws from the cover; they are designed to remain attached.
Remove the cover from the back of the terminal and locate the USB Type-C plug between the slots for the MicroSD and SAM cards.
Insert the multi-function cable’s USB Type-C connector into the terminal’s corresponding plug.
After you connect the multi-function cable to the terminal, make sure that the strain relief sleeve is seated in the slot at the top of the terminal.
NOTE: You can move the strain relief sleeve along the multi-function cable to position it correctly.
Re-install the cover and tighten the two screws to complete the cable installation.
