The Velmix LQ controller (232 or IP) includes the following components:
The Velmix LQ controller components offer different functions and information, listed below:
Multifunction button -- depending on the Veloce POS software configuration, the button can be used to:
Pause during long pours.
Stop the pour.
Calibrate the stoppers.
Ethernet network status indicator
Off : Not used with the Velmix LQ 232.
Solid red: No Ethernet connection.
Flashing yellow: In pairing mode, waiting for a DHCP IP address.
Flashing green: Pairing mode, IP address obtained, UDP broadcast started for POS detection.
Flashing blue: Pairing mode, UDP broadcast response by POS obtained, TCP/IP port open, waiting for connection on TCP/IP port by POS.
Solid blue: The Veloce POS is connected to the Velmix LQ IP's TCP/IP port.
Operating status indicator
Solid blue: The Velmix is at rest, with no stopper in the activator.
Solid green: A valid stopper is in the activator.
Solid red: The stopper is not recognized by the Veloce POS.
Flashing green: The activator is active during a pour.
Flashing red: Communication problem between the Vemix LQ and Veloce POS.
Activator connector -- activator connection.
Multifunction button
N - Ethernet network status LED (not used with Velmix LQ RS232)
S - LED status indicator
Activator connector