Toolbar

This option allows to choose whether to display or not display the toolbar (all the icons at the top of your screens). This selection toggles from enable and disable. When there is a check mark beside the option, the option is enabled and you will see the toolbar.

Status Bar

This option allows to choose whether to display or not display the status bar (the line located at the bottom of your screen) or not. This selection toggles from enable and disable. When there is a check mark beside the option, the option is enabled and you will see the status bar.

Receivable

Protocol

Select the appropriate accounting protocol.

• Accounting: to use the accounting and accounts receivable interfaces.

• Local: to use the accounts receivable module from Maitre'D.

• Front Desk Interface: to manage the Receivables through a Room Charge system.

Print Balance

Enable this option to print the customer balance on a sale's receipt from the workstation.

Print tip and total

Enable this option to print tip, total and signature lines on receivable checks so that members can pen in a tip and total, like they would on a credit card transaction.

Display Balance

Enable this option to display the Accounts Receivable Balance with the account's number and name when selecting from an Accounts Receivable list on the workstation.

End of Day

Automatic End Of Day

Enable this option for the Back-Office to attempt closing the day at the time programmed in the Time For End Of Day option below. If no time is set, nothing will be done.

Display End Of Day Result

Enable this option to show a confirmation window after the End Of Day to confirm if it has completed successfully or not.

Time for End Of Day

This is the time when End Of Day is processed. If the system was not able to run the End Of Day, a warning message displays. If you enter 00:00, the system will not check for end of daytime. Time enter must be between midnight and noon.

POS Reboot Time

This is the time that the workstation will reboot automatically. If you enter 00:00, the system will not check to reboot workstations.

Days Kept Summary

This is the number of days that you want the computer to keep for the daily report. Enter your input in this field. The maximum is 9999 days.

Bar Interface

The Bar Branch Option allows to manage the Bar interface Configuration.

Interface

Select the bar interface connected to the system.

Enhanced Communication

Enable this option to improve the performance of the communication between Maitre'D and Berg devices when used with North American Protocol.

Enhanced Protocol

Enable this option to support sequentially numbered packets from the Azbar bar device, as supported by azbar protocol version 3.70D.

North American Protocol

This option is useful if your electronic bar device is an Azbar or a Berg. Select it if your system uses the North American Protocol, in which drinks can only be served after they have been ordered.

Cumulate per Workstation

Enable this to cumulate transaction by workstation instead of by bar operator. When used, if the manager ask for a bar interface report, the information is consolidated by workstation.

Manual Section Assignment

Enable this option to allow manually reassigning bar sections to workstations from the Bar interface menu at the workstation.

Default Sections on EOD

Enable this option to force manually assigned sections to be reset to their default values during the End of Day process.

Cumulate per Revenue Center

Enable this option so that poured items are cumulated in the bar section defined in the revenue center which the item was ordered from.

Order by Section

Enable this option to cumulate orders from different workstations in the same section to a unique dispenser. To use this option with the Berg interface, you must also select the Cumulate per Workstation option. Then, within the Devices Branch of every workstation in the same section other then the workstation where the bar dispenser is physically connected and defined, you must assign the same section as the bar dispenser workstation, setting the port line to Null.

This Berg interface option allows to include recipes for cocktails.

Directory

This option is useful if Electronic bar is XML Export (Scanabar). Select here the path of the folder that the Bar Interface provider communication engine will monitor. Use the folder icon to browse to your preferred directory.

Discount Manager

The Maitre’D External Discount Manager Interface allows restaurants to apply discounts on guest checks which are managed by a third-party software, application or website. This also allows for specific promotion codes to be used and validated by the third-party. Loyalty cards can also be used to determine availability and eligibility for discounts.

Before using the Discount Manager, an account needs to be setup with a supported External Discount Management System (EDMS) provider.

Provider

Select your provider amongst the available choices.

Merchant Number

Type in the merchant number provided by your EDMS provider.

Communication

URL

Type in the URL, web address or IP address used to communicate with your EDMS provider.

Time Out

Enter the time out value, in seconds. Recommended value is 5 seconds. Please contact your EDMS provider to see if they have different recommendations.

Retry Delay

Enter the Retry Delay value, in seconds. Recommended value is 5 seconds. Please contact your EDMS provider to see if they have different recommendations.

User Name

Type in the user name provided by your EDMS provider.

Password

Type in the password provided by your EDMS provider.

Click this button to test your communication settings. A success message will be displayed if the connection is successful.

Option

Promotion Type

From this drop-down list, select the type of promotion that will be accepted at the POS workstations:

None

External promotions will not be accepted at the POS workstations.

Promotion Code

The POS Workstation will only accept external discounts based on promotion codes. Promotion codes can be keyed in, swiped or scanned.

Loyalty Card

The POS Workstation will only accept discounts tied to a loyalty (Frequent Diner) card. The card can be keyed in, swiped or scanned.

Prompt for type

The POS workstation will ask every time whether a promotion code or loyalty card should be used. This option allows for both promotion types to be used on the same system.

Send Invoice Detail

On Query

Select this option to have Maitre’D send the invoice detail to the external provider at the same time as the Discount Manager database is queried.

On Commit

Select this option to have Maitre’D send the invoice detail to the external provider as the discount is applied.

Linked Customer

Enable this option to have Maitre’D send the invoice detail to the EDMS provider even if no discount was applied, as long as the customer folio was entered.

Unlinked Customer

Enable this option to have Maitre’D send the invoice detail to the EDMS provider even if no folio was entered for the customer.

Log

Level

Enable the Log Level type you want to use for operations trace

Use the View/Log button to open and view log.

Frequent Diner

Provider

Select the Frequent Diner provider that is interfacing with Maitre'D.

Merchant number

Enter the merchant number provided by the Frequent Diner Company.

Accept Swiped Entries Only

Enable this option to only accept magnetic card identification, and disable manual entries.

Print Tracking Info on Receipt

Enable this option to print on the Frequent Diner receipt the current total of a tracked item defined in Point of Sale Control / Frequent Diner / Tracking

Accept Negative Transaction

Enable this option to deduct from the current total a voided tracked item defined in Point of Sale Control / Frequent Diner / Tracking.

Customer Name in Kitchen

Enable this option to allow Frequent Diner information to be printed on kitchen printers.

Points Mode

Enable this option to modify the way Frequent Diner Points are shown and redeemed. This redemption method can use free Points Items once the sufficient amount of points have been accumulated, in addition to using a discount. To use these points, first select the Frequent Diner when entering the table, and then choose Items with the Point function for which the frequent diner has enough points accumulated. You can not combine items with the Point function and other types of items on the same check.

Display Information

Enable this option to show the point balance in addition to the name or folio number of a Frequent Diner on the Order screen.

Unique Swipe

Enable this option to restrict swipe and win promotions to a single swipe per transaction.

Invoice Detail on Redemption

Enable this option so that the full invoice details are sent through the external Frequent Diner interface on "Redeem" transactions.

Division Total

Enable this option to calculate Frequent Diner points on the total of all division containing the same formula instead of on each item individually, to avoid truncation of the point total.

Check Total

Enable this option to calculate Frequent Diner points on the total of the check, including taxes.

No Points on Redeem Amount

Enable this option not to add points to the frequent diner's account for the portion of the transaction paid with redeemed frequent diner points. For example, if a check of $100.00 is paid with $20.00 or redeemed points and with $80.00 of another payment type, the frequent diner's account will receive new points based only on the $80.00.

Promotion

Select the promotion to apply on the Check Total from the drop-down list.

Print Receipt

You can select if the receipt is generated Always, On Demand or Never.

Communication

Time Out

Delay in second before Maitre'D will assume that the provider does not respond. This setting will depend on the type of connection you have (Dialup, Intranet).

Retry Delay

Delay in second used by the POS workstation to poll the Back-Office application and check if there is an answer back from the provider. If you set this delay too short, you will generate a lot of traffic on the network.

IP Address

Enter the TCP/IP address or server name of Frequent Diner provider's server.

TCP Port

Enter the TCP/IP port number you are allowed to connect through on the Frequent Diner provider's server.

Password

Enter the merchant password to access the frequent diner provider's server.

Domain

Enter the domain supplied by the Frequent Diner provider.

Seller Profile ID

Enter the seller profile ID supplied by the Frequent Diner provider.

Profile ID

Enter the profile ID supplied by the Frequent Diner provider.

Currency

Select USD for United States Dollars, or CAD for Canadian Dollars, according to your configuration on the Frequent Diner provider's server.

Points To Money

Redeem

Enter the slice of points used as the base for the calculation of money available as credits on purchases.

To

Enter the amount of money to be made available as credit on purchases for each slice of points entered in the Redeem field above.

Log

Level

Enable the Log Level type you want to use for operations trace.

Use this button to open and view log.

Gift Certificate

Provider

Enable the Gift Certificate provider that is interfacing with Maitre'D.

Merchant number

Enter the merchant number provided by the Gift Certificate Company.

Split Tender Transaction

Enable this option to accept partial payment from a gift certificate card whose available amount is lower then the invoice's total. In such a case, the card is emptied, and the remaining amount must be closed with another payment type.

Print Receipt on Purchase

Enable this option to force the printing of a regular receipt when purchasing a gift card through the employee's special menu.

Communication

Time Out

Delay in second before Maitre'D will assume that the provider does not respond. This setting will depend on the type of connection you have (Dialup, Intranet).

Retry Delay

Delay in second used by the POS workstation to poll the Back-Office application and check if there is an answer back from the provider. If you set this delay too short, you will generate a lot of traffic on the network.

IP Address

Enter the TCP/IP address or server name of gift certificate provider's server.

TCP/IP Port

Enter the TCP/IP port number you are allowed to connect through on the gift certificate provider's server.

Password

Enter the store password to access the Gift Certificate server.

Domain

Enter the domain supplied by the Gift Certificate provider.

Seller Profile ID

Enter the seller profile ID supplied by the Gift Certificate provider.

Profile ID

Enter the profile ID supplied by the Gift Certificate provider.

Currency

Select USD for United States Dollars, or CAD for Canadian Dollars, according to your configuration on the gift certificate provider's server.

Option

Keep Trans.

Enter the number of days to keep gift certificate transactions in the archive file.

Manager Password

Enable this option to force the use of a manager password to perform gift certificate functions on the workstation, such as registration, activation, increment and cancellation.

Use Registration Function

Enable this option to allow the use of the register function on the workstation.

Use Increment Function

Enable this option to allow the use of the increment function on the workstation.

Cancel Issue

Enable this option to accept negative amount activation as a cancellation of the card with the Mercury Pay interface.

No Provider Selection

Enable this option to always use the remote provider for gift certificates. Otherwise, you will have to select between local or remote provider for each gift certificate transaction at the workstation.

Multiple Activation

Enable this option to allow for multiple Gift Card activations before asking for the payment type, to be able to use the same Credit Card, for example.

Don't Send Terminal ID

Enable this option to remove the Workstation Number from the XML file sent to the provider.

Directory

Enable here the path of the folder that the Gift Certificate provider communication engine will monitor. Use the folder icon to browse to your shared directory.

Log

Level

Enable the Log Level type you want to use for operations trace

Use the View/Log button to open and view log.

Backup Servers

The Backup Server will add more security to your network by including full redundancy of the Maitre'D Back-Office software on any POS terminal in your network. Another computer on the network could also be setup to act as a Backup Server. If for any reason the Main Back-Office Server goes down and is no longer available to manage your network, from one key stroke your designated Backup Server will take over and in a matter of seconds will become a fully operational Back-Office for the rest of your workstations.

Server Name

Server name column displays the computer name.

Workstation Number

This column displays the workstation number assign to the backup server terminal. The regular Back-Office PC will be defined as Main server.

Status

This column displays the status of every server that is part of the Emergency network. Follow is the different status a server could have:

Current Server: Computer currently used as the Back-Office PC

Down: When the computer is not visible from the network.

Backup mode: Computer set as Emergency server waiting to be turned into current server if something happens to the current server.

Auxiliary Back-Office: PC that can be use to access the Current Back-Office PC for Revenue center and reporting maintenance.

Setting

Share Name

The name of sharing directory that will appear on the network.

Log Level

Select the level of logging. (None, Standard or Detail).

Click on this button to display information concerning Backup server's activities recorded in a log file using a text editor.

Use User name Activation

Enable this option to use an access level defined in the Maitre'D Back-Office to start the Emergency Backup procedure, instead of the legacy date sensitive password.

Access Level

Select from the drop-down list the Back-Office user that will be allowed to start the Emergency Backup procedure.

Cocktail Recipe

The cocktail recipe option allows to create PLU recipes for cocktails.

Code

PLU code from Point of Sale Control \ Revenue Center\ PLU. Only PLUs that have both the Used For Bar Interface and Use PluList options enabled in POS Control \ Revenue Center\ PLU will be available as cocktails.

Description

PLU description from Point of Sale Control \ Revenue Center\ PLU.

Select an existing cocktail recipe and click the Modify button to change its properties.

Click the Add button to create a new cocktail recipe.

Select an existing recipe and click Remove to permanently delete it.

Cocktail

Id

PLU code and description from Point of Sale Control \ Revenue Center\ PLU. Only PLUs that have both the Used For Bar Interface and Use PluList options enabled in POS Control \ Revenue Center\ PLU, will be available as cocktails.

Description

PLU description from Point of Sale Control \ Revenue Center\ PLU.

Recipe

This section displays all the ingredients that are part of the selected cocktail recipe.

Code

PLU code from Point of Sale Control \ Revenue Center\ PLU. Only PLUs that have only the Used For Bar Interface option enabled in Point of Sale Control \ Revenue Center\ PLU will be available as recipe PLUs.

Description

PLU description from Point of Sale Control \ Revenue Center\ Plu.

Select this button to add a PLU to the cocktail recipe.

Select this button to remove a PLU from the cocktail recipe.

Room Charge

Protocol

Select the protocol to be used to communicate with the Hotel Property Management System.

Identifier

This field applies to the NCR 2170®, NCR 2760®, Micros 4700® and Mariott® interface.

The format of this field, for NCR 2170® and NCR 2760®, is: XXXXYYYYZZAAAA where:

XXXX = System Identification

YYYY = Store Identification

ZZ = Hotel Identification

AAAA = SLD #

The format of this field for Micros 4700® is : XXX where ;

XXX = Payment number

The format of this field for Marriott® is : TTTTHHH where ;

TTTT = Tender key (numerical)

HH = Host number (numerical) [optional]

If the host number is not supplied in this field, then it will have to be prepended to the room number entered at the workstation.

Ex: Room number ? HHRRR where;

HH = Host number, must be two digits

RRR = Room or account, can be any number or digit

The format of this field, for IGS®, is : ABC where ;

A = Supervisor ID, 8 characters max

B = Access key for transaction # 20, 4 characters max.

C = Access key for transaction # 23, 4 characters max.

Commas are used for separators.

Name position

This field is used only with the NCR 2170® and NCR 2760® protocol. The name position is the position of the name inside the message field returned by the hotel system. These interfaces use the name in the posting transaction and need to extract the information from the inquiry message. If you do not have access to the information, you can try the values 1,2,... until the posting succeeds.

Framing character

This field is used only with the NCR 2170® and NCR 2760® protocol. The framing character is the first character of a valid transaction. It is used to identify the start of a transaction. You must enter it's value in hexadecimal. It's usual value is 0F.

First revenue center

Enter the number of the first revenue center to be used.

Identifier2

The format of this field, for IGS®, is : ABC where ;

A = Comp item ID code, 8 characters max

B = Comp type (PNTS or CVAL)

C = Workstation ID, 4 characters max.

Commas are used for separators.

Communication

Port

Select the communication port used to send the transactions to the front desk system. If you are not using the Hotel Front Desk Interface but the Room Charge module, you can select here the shared printer where you want the transactions to be print.

Baud Rate, Data bits, Stop Bits, Parity

For establishing proper communication using RS232 the computer needs to know the Baud Rate (speed), Data Bits, Stop Bits, and Parity. The most common values are:

Baud Rate = 9600

Data Bits = 8

Stop Bits = 1

Parity = None

Timeout

This is the delay in seconds the Maitre'D system will wait to get a response from the Hotel Property Management System. A good default value is 10 seconds.

Wait Answer

This option forbids other workstations from communicating with the host computer while it is waiting for an answer from the Hotel Property Management System. Otherwise, the workstations can operate while waiting for an answer from the Hotel Property Management System.

Confirmation

This option applies only to HMS-RMS, Holidex and Hotelsoft protocol. If set, a confirmation will be sent to the hotel interface to confirm the reception of the transaction.

IP Address

Enter the TCP/IP address of the Micros® server.

IP Port

Enter the TCP/IP port number you are allowed to connect through on the Micros® server.

Option

Post other payments

Select this option to allow posting of other payment media to the hotel system. This process is executed during the End of Day operation. Any payment media that has room charge identification will be sent to the hotel system using this Identification as a room number.

Skip Guest Query

Select this option to disable the customer inquiry when posting another media to the Micros interface using the Guest Selection option, since it is not a room.

Real time posting

Maitre'D supports real time media type posting to Micros 4700 interface. Post Other Payments must be enabled. Then in POS Control under each media type in the identification field define the room number where this media type will be posted.

Guest selection, Folio selection

Depending on the protocol that you are using, you have to check/uncheck this option, if the Guest Selection and Folio Selection are available to be used when closing a Room Charge transaction. Here is a list of the options available:

Protocol Guest Folio

Local OFF OFF

Gammix OFF OFF

Hotix OFF OFF

Micros ON/OFF OFF

Micros IP ON/OFF OFF

Quantel ON ON

Holidex ON OFF

HotelSoft ON OFF

NCR 2760 ON OFF

NCR 2170 OFF OFF (See note)

Use Mode as Sub-Revenue Center

Enable this option to include the mode number in the "Serving Period/Cashier/Shift number" data block of the packet that is sent to the Micros® 4700 interface when posting the transaction.

Workstation Number

Enable this option to use the workstation number, instead of the revenue center number.

Detailed Sales

Enable this option to separate the sale amount by division category for the Micros® protocol. If this option is disabled, all sales are sent in the first sale field and the other fields will contain zeros.

Prorated Operation:

Enable this option to send only the proportionate amounts in the division categories sales and taxes fields of a room when sending the Detailed Sales through the Micros® interface towards a Property Management Systems, and splitting the check between different rooms, or between other payment types, according to the percentage of the total actually assigned to this room.

Compatibility Mode

Enable this option so that the Micros® PMS interface can support postings that do not always respond to a post transaction with the required 18 characters packet but with only 17.

Send Value Added Tax

Send the Value Added Tax for all 4 totals to the Micros® server.

Home Page

Use Default

If you select this option, the Maitre'D default home page for the Server Control module will be used.

Address

Enter the URL of your head-office's intranet or your complete URL on the Maitre'D Databoard server that will be used instead of the default local home page for the System Configuration module.

Maitre'D Databoard Identification

User name

Enter the user name to access the Maitre'D Databoard server

Password

Enter the password to access the Maitre'D Databoard server.

Confirm Password

Confirm the password to access the Maitre'D Databoard server.

Table Management

You can use the floor management interface to send table information in XML format and update a third-party table management application data in real-time.

Interface

Select Generic XML to send table status data to a 3rd party application in XML format, or GuestBridge to send the table status data to a GuestBridge server.

Directory

Type in the path used for exporting the table status data in XML format. Use the folder icon to browse to your shared directory.

URL

Type in the internet address used by the Table Management interface to connect to the table management service provider.

Store Account

Type in the Store Account number provided by Restaurant Diary.

User Name

Type in the User Name provided by Restaurant Diary.

Password

Type in the Password provided

Authentication Service

URL

Type in the internet address of the Restaurant Diary authentication service.

Password

Type in the password to be used by the Restaurant Diary authentication service.

Option

Time Out

Enter the time out delay, in seconds, to be used by the Restaurant Diary interface. The default value is 10 seconds.

Retry Delay

Enter the retry delay, in seconds, to be used by the Restaurant Diary interface. The default value is 1 second.

Use Booking List

Enable this option to replace the Hostess' waiting list by the booking list imported by the Table Management Interface.

Mapping

External Symbol

Select the symbol used by the GuestBridge server for each stage of the meal.

Log

Level

Enable the Log Level type you want to use for operations trace.

Use this button to open and view log.

Advanced

LAN Type

Choose a network type from the list.

TCP/IP Port

Enter the TCP/IP port number of your computer (default value is 1001).

TCP/IP Server

Enter the TCP/IP server address of your computer. It will be 4 numbers between 0 and 255 separated by dots (enter 0.0.0.0 to have Maitre'D use the current IP address assign to this computer).

Miscellaneous

Use Local Workstation

Enable this option to use a local workstation, this workstation will be the last.

Local Workstation Fast Exit

Enable this option to allow the use of the fast exit code from the local workstation application. (999).

Can Close Server

Enable this option to allow to close your Maitre'D server.

Always Put Workstation on Foreground

Enable this option if you want your workstation to always stay on top (Workstation on Back-Office version).

Use Inactivity Timeout

Enable this option so that if a module is left open for 30 minutes without any activity, all modules will be closed and the Back-Office application will come back to the Login screen.

Use Username Login

Enable this option to force Back-Office users to logon using a user name and a password.

Use Reward Coupons

Enable this option to allow the use of coupons from Point of Sale Control / Frequent Diner / Reward Coupons.

Use Messages Center

Enable this option to allow the use of messages from Point of Sale Control / Employees / Messages Center.

Use Event Manager

Enable this option to allow the use of the Event Manager tool.

Log

Server

The Log Option allows to start and view operations trace about Maitre'D server application. This option is for troubleshooting purpose and should be use only with the supervisor of your Maitre'D reseller.

Serial

Enable this option to activate the serial log.

Datapac

Enable this option to activate the Datapac log.

Network

Enable this option to activate the network log.

OPOS

Enable this option to activate the OPOS communication log.

Click the View button next to a log to display it.