Introduction

The PAX A80 countertop payment terminal is perfect for retail and bar/restaurant applications. This setup guide describes the following topics:

• A80 Terminal Overview

• Initial terminal configuration
• Activating the terminal

• Working with the terminal

The following illustrations show the location of the main terminal features and hardware:

Configuring the Terminal Network Connections

The terminal requires a network connection to communicate with the payment processor server to process transactions.

The PAX A80 is a countertop payment terminal that can connect to wired (Ethernet) and wireless (Wi-Fi) networks.

Configuring the Terminal Wi-Fi Connection

This section explains how to turn Wi-Fi on and connect to your network.

To connect to your wireless network:

1. On the terminal’s main screen, touch the Settings icon.

2. On the Settings screen, touch the Please Input Password field and use the keypad to type the password: either 9876 or pax9876@@.

3. Touch the checkmark icon on the keypad when you are done and touch OK.

1. After the terminal displays Connected for the selected network, touch the Back icon to return to the Settings screen.

2. Touch the Back icon again to return to the main screen.

Configuring the Terminal Ethernet Connection

This section explains how to enable Ethernet and connect to your network.

To connect to your Ethernet (wired) network:

1. Ensure your network cable is connected in the appropriate connector located on the back of the terminal and make sure the other end of the network cable is connected to a network jack or hub.

2. On the terminal’s main screen, touch the Settings icon.

3. On the Settings screen, touch the Please Input Password field and use the keypad to type the password: either 9876 or pax9876@@.

1. Touch the Back icon twice to return to the main screen.

Connect the Terminal Cables

There are multiple connection ports on the back of the terminal. Countertop terminals generally require AC power and Ethernet connections.

Your configuration may also include a connection to a POS system or an additional PIN pad.

Use the diagram on the back of the terminal to determine where to connect the cables that apply to your configuration. The terminal’s connection ports are shown below:

Terminal Activation

PayFacto uses a self-service terminal activation procedure designed to save time while also providing better security. The new activation procedure applies only to countertop and mobile PAX payment terminals using the Android operating system. The new procedure applies to:

• All new merchants activating their terminals for the first time

Card Payment Options

There are three (3) ways for a customer to use their payment card with the terminal:

A80 Terminal Overview

This document will introduce you to your payment terminal as well as guide you through the process of preparing and configuring it in order to quickly begin processing payments.

Your PAX A80 payment processing terminal comes with the following:

The RJ-11 cable is not used for terminal communication and may not be included with your terminal.

Installing the Printer Paper

If the supplied roll of printer paper was not already installed in the terminal when you received it, you will need to install it before you can print any transaction receipts.

There are multiple communication ports on the back of the terminal with cable guides. The diagram on the back of the terminal shows where to connect the communication cables, in addition to AC power.

Powering the Terminal On or Off

To power the terminal on or off, press and hold the red X key on the physical keypad.

Activate Terminal

After configuring the terminal’s network connection, you need to start the PayFacto payment application to complete the remaining steps. Terminal activation requires you to input a One Time Passcode (OTP) that PayFacto sends to the email address or telephone number registered to your account.

To activate the payment terminal:

1. Touch the PAYMENT icon on the main screen. The Welcome To Your Payment Terminal screen appears.

1. In the top right corner of the screen, your terminal ID (TID) appears; confirm that the number on the screen matches the TID on the label on the back of your terminal. The TID will not appear on your terminal screen after you complete the activation process.

1. Touch anywhere on the screen to begin the activation process.

2. Touch the desired option to receive the OTP.

Email

Phone Number

1. Touch the Send Code button.

1. If you select Email, look for a message from [email protected].

1. After you receive the 6-digit activation code, use the on-screen keypad to enter the code on the terminal screen.

1. If you enter the code incorrectly, a red exclamation appears to indicate that the code is incorrect.

1. Re-enter the code, or touch Resend Code to obtain a new OTP.

2. After you enter the OTP correctly, the payment application displays the Set Administrative Password screen to

Terminal Input Options

The PAX A80 terminal offers an on-screen keypad as well as a physical keypad to enter transaction amounts. Your terminal operators and customers enter information and respond to prompts using either the terminal’s touch screen or physical keypad.

There are three (3) colored function keys on the physical keypad that you can use to confirm, correct, or cancel an operation:

• To confirm an entry, touch OK on the screen or press the green O key

• To correct an entry, touch BACK on the screen or press the yellow < key

• To cancel a function, touch CLEAR on the screen or press the red X key

Configuring the Terminal Display Language

By default, the terminal displays all information in English. This procedure explains how to change the terminal’s display language if necessary.

To change the terminal display language:

1. On the terminal’s main screen, touch the Settings icon.

2. On the Settings screen, touch the Please Input Password field and use the keypad to type the password: either 9876 or pax9876@@.

3. Touch the checkmark icon on the keypad when you are done and touch OK.

Set Passwords

To prevent unauthorized individuals from changing the terminal’s configuration, you need to set the Administrator and Merchant passwords. These passwords restrict access to certain functions on the terminal.

When setting your passwords, you must respect the following parameters:

• Passwords must be 6 characters long

Replacing the Printer Paper

The terminal uses 2 ¼” or 58mm thermal paper rolls to print transaction receipts.

To replace the printer paper: