# Introduction

### Introduction

This guide will explain how to install the cable attachment bracket for the PAX A80 terminal (part number AZP-310006) designed to prevent the accidental disconnection of cables from the terminal.

{% hint style="warning" %}
IMPORTANT! This cable attachment bracket is only for use with PAX A80 terminals used in countertop environments. It is not compatible with the A80 extension pole for drive-through applications.
{% endhint %}

The topics covered in this guide include:

* [Preparing the Terminal](https://documentation.payfacto.com/Accessories/A80_Cable_Attachment/CA-EN/First_Topic.htm#PrepareTerminal)
* [Installing the T Bracket](https://documentation.payfacto.com/Accessories/A80_Cable_Attachment/CA-EN/Installing_the_T_Bracket.htm)
* [Cable Installation](https://documentation.payfacto.com/Accessories/A80_Cable_Attachment/CA-EN/Cable_Installation.htm)

***

### Preparing the Terminal <a href="#prepareterminal" id="prepareterminal"></a>

Before you can install the cable attachment to the PAX A80 terminal, you must prepare the terminal by doing the following:

1. Power off the terminal by pressing and holding the red X key on the physical keypad.&#x20;

\
![A80 power button](https://documentation.payfacto.com/Accessories/A80_Cable_Attachment/CA-EN/assets/images/A80_KeypadPowerButton.png)

2. Turn the terminal over and remove all cables from the terminal's communication ports.

\
![A80 back no cables](https://documentation.payfacto.com/Accessories/A80_Cable_Attachment/CA-EN/assets/images/A80_Back_NoCables.png)