# Replacing the Printer Paper ### Replacing the Printer Paper The terminal uses 2 ¼” or 58mm thermal paper rolls to print transaction receipts. #### **To replace the printer paper:** 1. On the back of the terminal at the top, lift the lever with the contactless logo to unlock and open the printer cover. A80 contactless logo {% hint style="info" %} NOTE: The printer cover opens on a hinge, it does not come off the terminal. {% endhint %} 2. Place the roll of printer paper in the paper tray, leaving about 2 inches (5 cm) of paper beyond the printer's cutter as shown in the following example: \ ![A80 open paper tray](https://documentation.payfacto.com/Terminals/A80/CA-EN/assets/images/A80_OpenPaperTray.png) {% hint style="warning" %} IMPORTANT! Make sure the paper unrolls from the back of the roll, otherwise the printer will be unable to print the transaction receipt. {% endhint %} 3. Close the printer cover until it snaps into place and remove any excess paper. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.payfacto.com/payfacto-knowledge/canada-doc-center/terminals/countertop/pax-a80/a80-setup-guide/working-with-the-terminal/replacing-the-printer-paper.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.